Size: 291*133*68
Technical parameter: high reliability
Built in EMI filter
Low output ripple and noise
Protection function: overload protection / short circuit protection
Overvoltage protection
Built in fan forced cooling
Coating case
One year warranty
AC input voltage range...... ..90-260VAC 120-370VDC
Input frequency......... .47-63Hz
Input surge............ Cold start, 50A/230VAC
Output voltage regulation range............ -5%-+10%
Voltage regulation (full load)......... Less than or equal to 0.5%.
Output overload protection............... 110%-150% turn off, power on automatic recovery
Output overvoltage protection......... .115%-150% voltage output
Rise time, hold time......... .50mS, 20mS full load (typ.)
Dielectric strength...... ... I/P-O/P, I/P-FG:, 1.5KVAC, O/P-FG:0.5KVAC, 1, min
Operating temperature......... .0-40, @100%, -10%@80%, 50 @60%
Storage environment...... -20 ~ +85 DEG C, 20% ~ 95%RH (without frost)
Safety standard...... It conforms to GB4943, UL60950-1, EN60950-1
EMC standard...... Conform to GB9254, EN55022, class, A
Heat dissipation mode......... Built in fan cooling
Weight......... 3.05kgs/pcs
Product model
DC output
Load regul.
R&N
Efficiency
A-600-5
5V,100A
1%
150mV
77%
A-600-7.5
7.5V,80A
1%
150mV
78%
A-600-12
12V,50A
0.5%
150mV
80%
A-600-13.8
13.8V.43.5A
0.5%
150mV
81%
A-600-15
15V,40A
0.5%
200mV
83%
A-600-24
24V,25A
0.5%
200mV
85%
A-600-48
48V,12.5A
0.5%
300mV
86%
A-600-110
110V,5.5A
0.5%
500mV
88%
model performance
S-800-12
S-800-13.5
S-800-15
S-800-24
S-800-27
S-800-48
DC output voltage
12V
13.5V
15V
24V
27V
48V
Output voltage tolerance
±1%
±1%
±1%
±1%
±1%
±1%
Rated output current
66A
59A
53A
33A
30A
16A
Output current range
0-66A
0-59A
0-53A
0-33A
0-30A
0-16A
mVp-p
150mVp-p
150mVp-p
150mVp-p
240mVp-p
240mVp-p
240mVp-p
Incoming line stability
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
Load stability (Note 5)
±1%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
DC output power
800W
800W
800W
800W
800W
800W
efficiency
84%
84%
83%
85.5%
86.5%
87%
Adjustable range of DC voltage
±10%
±10%
±10%
±10%
±10%
±10%
Input voltage range
190～240VAC/230～240VAC
AC input current
8A/230V
Power factor
0.95/100～240VAC
Impulse current
75A/230V
leakage current
<3.5mA/240VAC
overload protection
105%～135% type：FOLDBACK Cut output reset: auto recovery
Overvoltage protection
13.8～16.2V
15.5～18.2V
18～21V
27.6～32.4V
31～36.5V
57.6～67.2V
High temperature protection
……
temperature coefficient
……
Start, rise, hold time
1.5s,50ms,20ms
Seismic resistance
10 to 500Hz, 2G 10 seconds, /1 cycle, total 60 minutes, each axis
withstand voltage
Between input and output: 3KVAC, input and shell: 1.5KVAC output and shell: 0.5KVAC
Isolation resistor
Input / output room, input with enclosure, output with enclosure：500VDC/100M Ohms
Operating temperature and humidity
-10℃～+50℃,20%～90%RH
Storage temperature and temperature
-20℃～+85℃,10%～95%%RH
Outline size
291*132*68mm
weight
2.3Kgs
safety standards
UL1950,TUV EN60950
EMC standards
IEC1000-42,3,4,5,6,8,11 IEC100-3-2
Note:
1, the above parameters test conditions are: 230VAC input, rated load, 25 degrees, 70% RH. humidity.
2, tolerance: including set tolerances, line stability, load stability (Note 5).
3, ripple test: 20MHz with A12 "twisted pair", interrupted with 0.1uF&47uF capacitor short circuit.
4 、 line voltage stability test: full load, the minimum line voltage to the maximum voltage.
5 、 load stability test: load from 0% to 100%, and other output is 60% rated load.
6, each output reaches the maximum current, but the total load can not exceed the maximum output power.
7, C2,3,11 must be removed.
Submit orders
All information in the confirmation page after the check, please click "submit" at the bottom of the page, if enter the settlement of a complete page shows your checkout process has ended, order has generated, in the settlement inflammation of the order page you can also understand the culture order number (it is recommended that you will be inflammation from the order number and customer order number recorded at the same time, in order to "order inquiry"). Instrument mall management system will be your order send Email to confirm your order information.
Reply to order by received payment authorization, JK17 instrument network will complete delivery and accounts processing.
Do order at any time if you want to know, you can query in the "order inquiry" function of your order.
JK17 instrument ? network also prepared fax form of order Goods payment for goods
Customers in Shanghai in order after check, please wait for our delivery.
Customers outside Shanghai, changzhou, please order after check to wire payment or deposit to us, see remittance way remittance way...
more>>
Tel ：（+86）4001128155 0519-8556347，89187775
0755-61282381，27467016
Email: mailjk17@126.com
copy Changzhou Jinailian Electronic Technology Co., Ltd 2009 All Rights Reserved.
Changzhou Jinailian Electronic Technology Co., Ltd 2009 All Rights Reserved.